However, in some instances, you might have to face a few issues in establishing a successful connection between your device and the PC. When that happens, you might be notified about it via the USB Device not recognized pop-up. Along with that, you could also get an accompanying error message that reads out “The last USB device you connected to this computer malfunctioned, and Windows does not recognize it”.
Unfortunately, this message doesn’t paint a clear picture as to the root cause of the underlying issue or the steps to rectify it. With that said, there do exist a few handy workarounds that are known to fix this error. So without any further ado, let’s check them out.
The Basic Fixes to Try First
Before moving on with the advanced ones, here are some easy-to-execute methods that could work out in your case.
First off, unplug the device and restart your PC. Once it boots up, wait for a few minutes and then reconnect your device via USB cable to the PC and see if the issue is fixed or not.Furthermore, it is recommended to use the cables that came shipped with the device itself. If your device didn’t come with a USB cable, then make sure that you are using the one manufactured by a trustworthy brand.Likewise, you should also try connecting the device to some other port on your PC. It is also advised not to connect your device to USB 3.0 and rather use the 2.0 port itself. This is because some devices still have compatibility issues when it comes to using the latest USB port.
Try out the aforementioned tweaks and see if it is able to fix the USB Device not recognized error. If you are still getting this bugged with this issue, then here are a few other methods that deserve your attention.
How to Fix USB Device Connected malfunctioned?
Here are Few Methods to Fix the USB Device you Connected to this Computer Malfunctioned, and Windows does not Recognize it Error
Update Drivers
If you are using an old or outdated driver for the connected device, then the latter might not be able to be recognized by your PC. Hence you should consider updating it to the latest version right away. Here’s how it could be done (make sure the affected device is connected to the PC via USB cable). Once that is done, restart your PC and check if it is able to recognize the USB device.
Disable USB Selective Suspend Settings
If you (or your PC for that matter) haven’t interacted with the connected device for quite a while, then the latter might go into a hibernation mode. As a result, some of its functionalities would be limited. And this could well be the reason for your PC not being able to recognize the USB device. So the best bet, in this case, is to prevent your USB drive from getting powering off or even going to the sleep state. For that, you will have to disable the USB selective suspend settings, which could be done as follows: Once that is done, remove your device and reconnect it to your PC. Check if it is able to fix the USB Device not recognized issue.
Reinstall Drivers
If none of the aforementioned methods worked out in your favor, then there is a possibility of the drivers getting corrupted. If that happens, then even updating them might not be able to fix the underlying issue. Rather you should consider uninstalling and then reinstalling these drivers from scratch. Here are the required instructions for the same. With this, we conclude the guide on how to fix the USB Device not recognized issue. We have listed four different methods to rectify this issue. Do let us know in the comments section which one spelled out success in your case. If you’ve any thoughts on USB Device Not Recognized Error Fix for Windows PC, then feel free to drop in below comment box. Also, please subscribe to our DigitBin YouTube channel for videos tutorials. Cheers!
